Model No.: LE-SOC-24V
Features
Computer Designed Non-directional Smoke Chamber
360° View of Detector Case
Low Profile, 1.8″ Height (with Base)
2 or 4 Wire Base Compatibility, Relay Bases Available
Very Stable Operation, RF/
Standby Current Transient Protection Low, 59μA at 24VDC
Two Built-in Power/Sensitivity Lights for Supervision/Alarm
The automatic sensitivity window check function meets the requirements specified in NFPA 72, Chapters 2 and 7, Inspection, Testing, and Maintenance.
Photoelectric smoke detector
Description
Photoelectric smoke detector
The LE-SOC-24V Photoelectric Smoke Detector uses two dual-color LEDs to indicate status. In the normal standby state, the LEDs flash green every 3 seconds. When the detector senses that its sensitivity has deviated outside the UL listed sensitivity window, the LEDs will flash red every 3 seconds. When the detector senses smoke and goes into an alarm state, the status LEDs will turn red. The detector uses an infrared LED light source and a silicon photo-biode receiving element in the smoke chamber. In the normal standby state, the receiving element receives no light from the pulsed LED light source. In the event of a fire, the smoke enters the detector smoke chamber and the light is reflected from the smoke particles back to the receiving element.
Datasheet
DownloadRelated products
Repeater TFT IRIS/SIMPO
Power Supply: From the panel External power supply unit | AUX/GND (24±4)VDC |
Maximum power consumption | 0.11A |
Communication | RS 485 |
Twisted pair cable UTP CAT 5: Maximum length between repeater and panel Cross Section | max. 1000m 0.5-2.5mm2 |
Degree of protection | IP40 |
Color, Material | Grey, ABS |
Operation temperature | -5ºС up to +40ºC |
Relative humidity | up to 95% (without condense) |
Storage temperature | -10ºС up to |